Categories
Information
Shopping Cart
Latest
Featured
BrandsDynamo bracket for rear wheel
 Click to enlarge |
|
A bracket to allow fixing of a dynamo on a bicycle which does not have a mounting point on the frame. This fits within the rear triangle of the frame so that the dynamo works on the rear wheel.
It can be used on both sides of the bike. However, it is easiest to install it on the right hand side of the bike with a "left hand" dynamo.
Note that this is sized for a traditional bicycle frame. Tubing up to about 15 mm in diameter can be accommodated within the bracket with the supplied bolts. You may be able to use it with slightly large tubes if you fit slightly longer bolts.
Write Review
Your Name:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
Click to enlarge
Click to enlarge
 Nordlicht bottle/sidewall Dynamo/Generator Nordlicht Dynamo €33.88 
|
 Dynamo bracket for front wheel Dynamo bracket for front wheel €2.54 |
 Dynamo bracket for brake mount. Dynamo bracket for brake mount. €4.24 |
 AXA HR-Traction Dynamo AXA HR-Traction Dynamo €27.83
|
 Zip tie / cable tie / Kabelbinder Zip tie €0.05 |
 Busch und Muller Lumotec Lyt 20 lux LED headlight Busch und Muller Lyt €20.57
|
 Dynamo lighting cable (electrical wire) Dynamo cable €3.63 |
 Front light bracket for fork crown fitting with cantilever and V-brakes canti light mount €3.03 |
 Busch und Muller Toplight Flat Plus LED rear light B and M Toplight Flat €15.13 |
 Busch und Muller bracket for mounting rear light on saddle rails Busch und Muller saddle rail bracket €8.89 |
 Headlight bracket for suspension fork Headlight bracket suspended fork €6.05 |