Categories
Information
Shopping Cart
Latest
Featured
BrandsCrank puller
 Click to enlarge |
|
This tool is used to remove cranks from a square section bottom bracket. First remove the (usually plastic) cover from the centre of the crank, then screw the tool into the thread on the crank, then turn the inside of the tool with a spanner to apply pressure and pull the crank from the bottom bracket.
Write Review
Your Name:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
There are no additional images for this product.
 Sunrace cartridge bottom bracket. Cottered and tapered fittings. Sunrace cartridge BB €16.94 |
 Single speed crankset Single speed crankset €23.35 |
 Shimano square taper bottom bracket BB-UN26 BB-UN55 BB-UN73 BB-UN300 Shimano Bottom Bracket €15.73 |
 Shimano Compatible Bottom Bracket tool Bottom Bracket Tool €10.29 |
 Shimano Nexus Chainset Shimano Nexus chainset €39.93 |
 Stronglight / Miranda Shimano Nexus Compatible chainset Nexus compatible chainset €30.86 |
 Shimano replacement chainring Shimano chainring €8.89 |
 Alligt bottom bracket holder Bottom bracket holder €56.87 |
 Traditional design steel crankset - without cotter pins Vinty chainset €22.99 |
 Frame expander (uitzetter) frame uitzetter €7.44 |
 Spoke nipple wrench Spoke wrench €7.26 |