Categories
Information
Shopping Cart
Latest
Featured
BrandsBrake cable ferrules (ends)
 Click to enlarge |
|
At either end of a length of brake cable you need a ferrule. These have the standard inner and outer diameters of 5.1 mm (i.e. to fit 5 mm kabel) and 6 mm. If you replace your brake cables for both front and rear brakes, you will need four ferrules.
Write Review
Your Name:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
Your Review: Note: HTML is not translated! Maximum 2000 characters.
Rating: Bad Good
Enter the code in the box below without XX:
There are no additional images for this product.
 Teflon lined woven brake outer cable Low compression brake outer cable per 10 cm €0.39 |
 Shimano Alivio V-Brake Shimano V brake €20.57 |
 Zip tie / cable tie / Kabelbinder Zip tie €0.05 |
 Complete Sturmey Archer cable SA complete cable €9.08 |
 Complete brake cable for hub brake hub brake cable €6.66 |
 Front wheels for Shimano Roller Brakes Front wheel with roller brake €76.23 |
 Saccon L14 brake levers adaptable for all cable braking systems Saccon L14 brake levers €26.62 |
 Low friction stainless steel brake inner cables low friction brake inner cable €2.42 |
 Shimano Alivio V-Brake levers Shimano brake lever €13.31 |
 Shimano brake lever (single) Shimano Brake lever single €6.66 |
 Double brake lever for both brakes on one handlebar Double brake lever €11.50 |
 Shimano V-Brake "Noodle" Shimano v noodle €1.68 |